MRI Compact

What it adds

• One pod, end to end: magnet room with RF cage, then control room, then equipment area
• Based on mobile MRI trailer layouts (approx. 48 ft × 8.5 ft inside). The pod is shorter (39 ft) and wider (11 ft)
• Optional support pod: patient change, reception, waiting and washroom
• Free-standing: the 5-gauss line can extend outside the pod

Building systems

• RF shielding
• Quench vent
• Chiller
• Dedicated power
• Reinforced floor

Rooms

Furniture & equipment

• • Compact or short-bore 1.5T MRI (model confirmed after the fit check)
• • Patient table
• • RF cage with RF-shielded door and viewing window
• • Quench vent pipe to the exterior
• • MRI control console and workstation
• • Operator chair
• • Gradient and RF cabinets
• • Chiller
• • Power distribution unit
• • Support pod: reception counter, waiting chairs, change cubicles and lockers, accessible washroom

Preliminary. Confirm with vendor site-planning guide.

Fit check

Preliminary. Confirm with vendor site-planning guide.

Equipment values

• UnitPreliminary

  Compact or short-bore 1.5T MRI. No model is named until the fit is confirmed

• Layout basisPreliminary

  Mobile MRI trailer layouts, approx. 48 ft × 8.5 ft inside

• Magnet weightPreliminary

  approx. 4,000 to 5,000 kg (typical 1.5T), taken as a concentrated load

Every value above: Preliminary. Confirm with vendor site-planning guide.

Design notes

• Limited patient comfort and throughput compared with the MRI Suite
• The 5-gauss line can extend outside the pod: control the exterior zone (fencing and signs)
• If the support pod joins the MRI pod, keep reception and waiting at the end away from the magnet, and confirm with the vendor's field plot
• Quench vent to the exterior
• Chiller and dedicated power
• Trailer layouts are approx. 48 ft long and the pod is 39 ft long inside: confirm the magnet room length with the vendor