Advanced ImagingRP-MRI3 podsNewPreliminaryLicensed service
MRI Suite
1.5T MRI across three joined pods.
Floor plan to followThis pod is being redrawn on the 12' × 32' RESPAND grid. Room areas follow with the plan.
Planned as 3 pods. Pod count and floor area are confirmed when the plan is redrawn on the grid.
What it adds
- Pods 1 and 2 join side by side with no shared wall, making one scan room approx. 23 ft wide inside
- Scan room holds the magnet, the RF cage and the 5-gauss zone
- Pod 3: control room, equipment room (chiller, cabinets) and patient change area
- Control room shares the long wall with the scan room, with an RF-shielded viewing window
Building systems
- RF shielding
- Quench vent
- Chiller
- Dedicated power
- Reinforced floor
Rooms
| Patient Change | — |
| Control | — |
Furniture & equipment
- • United Imaging uMR 570 1.5T MRI (70 cm bore)
- • Patient table
- • RF cage (Faraday cage) with RF-shielded door and viewing window
- • Quench vent pipe to the exterior
- • MRI control console and workstation
- • Operator chair
- • Gradient and RF cabinets
- • Chiller
- • Power distribution unit
- • Change cubicles and lockers
Preliminary. Confirm with vendor site-planning guide.
Fit check
| Pods required | 3 pods |
|---|---|
| Floor area | Confirmed with the plan on the 12' × 32' grid |
| Point load | Magnet, approx. 4,000–5,000 kg across pods 1 and 2 |
| Power | Dedicated supply; chiller |
| Shielding | RF cage; magnetic check of adjacent spaces |
Preliminary. Confirm with vendor site-planning guide.
Equipment values
UnitPreliminary
United Imaging uMR 570 (1.5T)
BorePreliminary
70 cm
Magnet lengthPreliminary
150 cm
Magnet weightPreliminary
approx. 4,000 to 5,000 kg (typical 1.5T), taken as a concentrated load across the joined pods
Every value above: Preliminary. Confirm with vendor site-planning guide.
Design notes
- RF shielding: a Faraday cage around the scan room
- Quench vent from the magnet to the exterior
- 5-gauss line kept inside the scan room and controlled
- Magnetic shielding check for adjacent spaces and pods
- Chiller and dedicated power
- Plan the delivery route for the magnet into the scan room
Add MRI Suite to your clinic
Configure in 3D and reserve your engineering and production slot.